Input Voltage:
5v to 25.2v
2S to 6S LiPo)
Current Output:
Peak: 10 amps

Continuous:
less than 12 volts input = 7 amps*
less than 24 volts input = 5 amps*

*Ratings are determined with a 5mph airflow on the BEC. Servo connectors are not rated for current in excess of 5 amps. Users are encouraged to replace the connectors if more than 5 amp currents are anticipated.
Default setting: 5.1 volts. User selectable in 1/10th volt increments between 4.8 and 9 volts. Castle Link USB Interface required to change output voltage (sold separately).

LED on indicates proper function of CC BEC. If LED is off, check for proper setup.

Low Input Voltage:
In the event that the input voltage falls below the desired output voltage, the CCCC BECBECBEC output is essentially equal to the input level.
CC BEC cannot output more voltage than the battery it draws from. The CC BEC will not operate or produce any output when input voltage drops below 4.0 volts.

Always range check your model. This device should be treated much like a speed control. Try to keep as much distance as possible between the radio receiver and components and the CC BEC unit.